Heavy Hammer crusher

Motor Power 20kw-100kw,Based on equipment moudel.
Capacity 500-3000kg, Based on equipment moudle.
Function Compressing and baling solid waste

Interested in this product? Please contact us for more details:

E-mail Whatsapp Get Quotation

Details

  1. Large feed size and high output.

  The maximum feed size can reach 1600mm, the crushing ratio is high, and the single machine can produce up to 2500 tons per hour. The design of the crushing cavity conforms to the principle of dynamics. The unique grateless structure design increases the throughput of materials. It can crush wet materials and solve the traditional hammer The problem of easy clogging and low output.

  2. Low investment, quick return on cost.

  It can be formed at one time, changing from multi-stage crushing to one-stage crushing, completely realizing the low-cost operation of one crushing and two crushing. The investment of the same output is reduced by about 35% compared with jaw crushing. The model conforms to the standards of construction.

  3. Super wear-resistant rotor

  The rotor disk wear-resistant retainer technology overcomes the traditional rotor disk's severe wear and the troublesome manual surfacing of the wear-resistant layer. The wear-resistant retainer is fixed to the rotor disk through a pin circlip, which is wear-resistant and easy to replace. The hammer disc is designed with eight-way hammer shaft holes and four-way standby. The hammer shaft holes are embedded with alloy steel shaft sleeves, which greatly extend the service life of the rotor disc.

  4. Reasonable structure

   Pòsuì jī bèibù cǎiyòng tōng jīn jiégòu, zhuànzǐ bù chuí tóu kě 360 xuánzhuǎn, dāngè biàn tóu zhòngliàng dà, zhuànzǐ pán zhíjìng dà, zhuǎnsù hélǐ, kě dǐkàng dà kuài wùliào de qiáng chōngjí lì, jī ké jiāngù yǒng bù biànxíng, chū kē lìdù dàxiǎo kě tiáo. Xià jī ké jīng yōuhuà shèjì hòu, gǎibiànle chuántǒng chuí pò bì tiáo kòngzhì chū liào lìdù dàxiǎo de fāngshì, jiǎnshǎole chuí tóu zài pòsuì qiāng nèi de mósǔn, shǐ chuí tóu de shòumìng tígāo 3-5 bèi, gèng jiénéng, gèng gāoxiào. 展开 141/5000 The back of the crusher adopts a ribbed structure, the hammer head of the rotor part can rotate 360, the weight of a single toilet head is large, the diameter of the rotor disc is large, the speed is reasonable, and it can resist the strong impact of large materials. The shell is firm and never deforms. The size is adjustable. After the optimized design of the lower casing, the traditional hammer-breaking grate control method of discharging particle size is changed, and the wear of the hammer in the crushing cavity is reduced, and the life of the hammer is increased by 3-5 times, which is more energy-saving and more efficient.

  5. Longer wear-resistant hammer head.

  Our company focuses on the research and development and production of crusher hammers. So far, it has more than 10 years of experience in the production of wear-resistant hammers. It has an independent modern casting plant and casting spectrometer, which can produce wear-resistant castings with a unit weight of less than 10 tons. . All wear-resistant parts on the crushing equipment are produced by our own foundry, and the quality of the parts is strictly controlled.


Technical Parameter


Releated Products


Releated Case


Get Solutions & Quotation

Please feel free to give your inquiry in the form below, We will reply you in 24 hours.

COPYRIGHT © BAIFA MACHINERY E-MAIL: support@baifamachinery.com TEL : +86